Vestibule doors are supplied complete with a sash, door frame, and hinges. In addition, the delivery set includes lock accessories - each door is equipped with a lock with electric locking, a mortise lock, a lock for a three-sided key on both sides, a lock with a beard and a mortise lock, the side doors additionally have a lock for electric locking of the doors when the train speed is more than 5 km/h.; Pads, rams, and handles are made of stainless steel.

The door leaf is an aluminum frame made of a special profile and lined with aluminum sheets. In places where hinges and locks are installed, there are special metal embedded elements. The door leaf has a double sealing system. The delivery set includes a single-chamber double-glazed unit, window moldings made of fiberglass, and protective handrails.

The vestibule door box is made of stainless steel.

The kit is equipped with hardware for attaching the units to the wagon.

Set of walls of the car. Transverse and longitudinal partitions are made of plywood 19 mm thick and lined with plastic 1.2 mm thick.

The elements of fixing the partitions to the floor are made of stainless steel, and the elements of fastening the partitions to each other are made of carbon steel with a powder coating.

The boiler room is delivered assembled with installed doors and locks. The doors of the boiler room are fixed: in the closed position - with locks, in the open - with a magnetic catch. The tray and niche for the kettle are made of stainless steel. The inner part of the boiler room is lined with galvanized steel.

Structural elements for fastening wagon equipment are made in the partitions.

The set of walls is equipped with hardware for attaching nodes to the car.

Elements vestibule facings made of decorated stainless steel.

The base of the steering wheel of the handbrake drive and the shell of the stop valve are made of fiberglass.

The doors of the boiler room are made of stainless steel.

The kit is equipped with hardware for attaching the units to the wagon.

Siding of the side walls of passenger rooms, service rooms, and corridors are made of thermoformed plastic. The facings of the side walls of the toilet rooms are made of fiberglass. A decorative profile is installed at the joints of the panels.

Window moldings are made of fiberglass.

Over-window and over-door eaves are made of powder-coated aluminum. Cornices are designed to close mechanisms of window shutters and mechanisms of sliding doors of the car and are made from the upper part of the window or door to the ceiling.

The kit is equipped with hardware for attaching the units to the wagon.

Blinds are made of a special aluminum profile with a powder coating. The roller blind ensures fixation of the control bar in any height position.

In the passenger boxes, in the driver's rest compartment, and in the service compartment, a double blind is installed - made of light-proof fabric and light-diffusing fabric. A single-blind is installed in the corridors - made of light-diffusing fabric.

windows are a two-chamber double-glazed unit glued into the car body, with the possibility of quick replacement of the double-glazed unit. Glass of transport performance.

All windows, except for the emergency one, have a window.

The set is equipped with a set of mounting parts.

A set of heating pipe enclosures made in a single design of polished stainless steel. Brackets for attaching casings are made of carbon steel with powder coating.

Enclosure covers (passenger boxes, corridors, service compartment, and driver's rest compartment) are hinged with locking in the closed position using a three-sided lock and have shaped openings for the passage of warm air.

In the small corridor, there is a vertical fence with a technological hatch for the return heating circuit. Material - carbon steel with powder coating.

The kit is equipped with hardware for attaching the units to the wagon.

A set of furniture in the service compartment of the car is made of stainless steel. Cabinet doors are equipped with latches.

The work area around the sink is lined with stainless steel panels.

The conductor's reclining chair corresponds to the dimensions of a class II chair with a headrest without armrests. The upholstery of the chair is fire-resistant acrylic wear-resistant fabric. Between the refrigerator and the chair, there is a partition made of plywood lined with plastic.

Furniture planning involves the installation of a control panel, a refrigerator, a microwave oven, a dispenser, and converters.

The tabletop of the folding table is made of thick plastic. The table-top folding mechanism is fixed on the side wall of the car above the fence.

The kit is equipped with hardware for attaching the units to the wagon.

A set of corridor elements. The railing is made of stainless steel pipe. Handrail brackets are made of stainless steel.

The cabinet urn is made of stainless steel. The set includes a 45-liter bin. The cabinet is equipped with a lid opening mechanism for loading garbage with a pedal and a damper for closing.

The kit is equipped with hardware for attaching the units to the wagon.

A set of toilet elements. The floor bath, the rack for fixing the toilet, and the lower part of the washstand are made of fiberglass. Linoleum is pasted onto the bathroom floor. In the lower part of the washstand, there is an urn with a pressure pedal. The stand for fixing the toilet is made to the entire height of the room, closes the pipeline, and has power elements for fixing the toilet. A container for hygienic pads on the toilet and a niche for toiletries are built into the rack.

The upper part of the washstand is made of stainless steel. Handles for adjusting hot and cold water and an anti-vandal tap for portioned electric water supply (by pressing a button) are mounted in the rack. A container for paper towels is also built into the rack.

In the toilet of the working and non-working side, a stationary handrail made of stainless steel pipe with brackets is installed under the window.

The set of toilet accessories consists of a shelf for toiletries, a soap dish, a soap dish for liquid soap, a roll paper holder, and a brush for cleaning the toilet and hooks.

The direct flush toilet is made of stainless steel and equipped with an electric flush system (using a button). The fan pipe for the toilet is made of stainless steel and has a heating system.

The kit is equipped with hardware for attaching the units to the wagon.

Ceilings are made of thin sheet carbon steel with powder coating. The ceiling panels are mechanically screwed to the brackets, which provides the necessary rigidity when the car is moving and does not create a rattle.

The structure of the ceilings has folding hatches for maintenance of communications, which are closed with three-sided locks. In the hatches and hinges of the ceilings, structural elements are provided for the installation of fire detectors, radio points, and deflectors. Ceilings come with built-in LED lights that have multiple lighting modes.

In the central part of the ceilings of the passenger boxes and the conductors' rest compartment, there is a perforation for supplying air from the air conditioner through the damper.

Each ceiling hatch is equipped with three-sided locks and a safety belt.

The kit is equipped with hardware for attaching the units to the wagon.

In a set of interior doors stainless steel door frame included. The door leaf is a plywood board lined with plastic. The ends of the sashes are finished with a stainless steel strip. The door has locks with stainless fittings (handles and covers). Hinged doors are equipped with a sash lock in the open position.

Sliding doors are made with the upper location of the door hinge (the guide is made of a special aluminum profile, and the rollers are a plastic roller with a pressed-in bearing). In the lower part of the sash, it is possible to install an additional guide. The delivery set includes latches of the sashes in the extreme positions, handles, a night lock,and a mirror.

The toilet door lock on the working and non-working sides is equipped with a toilet occupancy sensor.

The kit is equipped with hardware for attaching the units to the wagon.

A set of furniture in the driver's rest compartment. The chest of the lower shelf is made of carbon steel with a powder coating. The frame of the upper and lower shelves is made of an aluminum profile. Furniture upholstery material is fire-resistant acrylic wear-resistant fabric. The lifting and fixation of the lower and upper shelves is carried out with the help of gas springs.

The coupe hanger is made of a special powder-coated aluminum profile. Other accessories are made of stainless steel.

The two-step compartment ladder is structurally built into the longitudinal partition. In the closed position, the body of the ladder protrudes beyond the plane of the partition by 4 mm.

The luggage rack is made of powder-coated aluminum alloy.

The tabletop of the folding table is made of thick plastic. The table-top folding mechanism is fixed on the side wall of the car above the fence.

The kit is equipped with hardware for attaching the units to the wagon.

A set of furniture in passenger boxes (9 boxes). Chests under the lower transverse and longitudinal shelves are made of carbon steel with a powder coating.

The frames of the upper and lower shelves are made of an aluminum profile. Furniture upholstery material is fire-resistant acrylic wear-resistant fabric. The lifting and fixing of the lower transverse shelves is carried out with the help of a gas spring. The upper transverse shelves are equipped with a spring mechanism for removing the force when lifting the shelf.

The upper longitudinal shelf folds into a luggage shelf.

The lower longitudinal shelf is divided into three sections, two of them are fixed, and the middle part transforms into a table. The backs of the lower shelves are mounted on longitudinal partitions.
All upper berths are equipped with safety handrails.

Stairs for access to upper berths and luggage shelves of improved design are made of polished stainless steel.

The luggage rack is made of powder-coated aluminum alloy.

The tabletop of the folding table is made of thick plastic. The table top folding mechanism is fixed on the side wall of the car above the fence.

Box fittings (handrails, trouser holders, fasteners, handles) are made of stainless steel.

The kit is equipped with hardware for attaching the units to the wagon.

Door single-leaf with an electric drive, when opening, they first move forward, then to the side. The door leaf is made of aluminum with a fire-resistant filler inside. The door is activated by pressing a button located on the door leaf on both sides.